That's how we build
cutting machine
1mm
max cutting thickness X axis
0,5mm
max cutting thickness Y axis
165cm
max operating width
Main features
- Equipped with multiple cutting units for simultaneous cutting on all four sides
- A mobile optical sensor reads the most diverse cutting marks for the accurate cutting
- Manual alignment of the prints to be cut in the longitudinal direction, while the vertical cutting units are set manually
- Speed 500 linear meter/hr
- Available for most varied materials, including photo papers, vinyl, paper for inkjet printing, polyester or polycarbonate films up to a thickness of 0.5 mm
- Easy loading of the reels
- Electronic controls with visual displays allow the operator to easily check any errors or malfunctions
- Vertical self-sharpening Blade
- Horizontal self-sharpening Blade
Optionals
- Laser
- Single vertical blade
- Double vertical balde
- Online kit (this optional allow to put the machine online with almost all the printer)
| Datasheet | Generals |
|---|---|
| Max. operating width | 1650 mm |
| Dimensions | 165 > 2160x800x1110 mm; 165 Kit on line > 1650x1940x350 mm |
| Weight | 165 > 95 kg; 165 Kit on line > 36 kg |
| Consumption | 0,5 A |
| Datasheet | Horizontal cut | Vertical cut |
|---|---|---|
| Max thickness | 1 mm | 0.5 mm |
| Speed | 40 m/min (131,24 ft/min.) | 12,5 m/min (41,01 ft/min.) |
| Tolerance | ± 1mm. to the mt | / |
| Datasheet | Reel |
|---|---|
| Max. diameter of roll | Ø 200 mm |
| Max. width of roll | 1650 mm |
| Max. weight of roll | 40 kg |